Full Hd 1720p Mini Camera Pen Recorder User Manual

User manual.

I. Product Overview

1. Microphone
2. Power button
3. Camera lens
4. F button
5. R (Reset) button
6. Yellow indication light
7. Blue indication light
8. Micro SD card slot
9. Mini USB port

II. Inside the box

1 x Conference Recorder Camera
1 x USB / AV cable
1 x DC 5 V Charge Adapter

III. Operation

>> Please make sure the camera is fully charged before use.

>> Please check the micro SD card (4GB - max 64GB, please initialize the card memory before using for the first time). If it is not securely attached to the SD card slot of the camera, the camera will not operate. SDHC class 10 micro SD card is recommended.

[Caution]: If for some reason the micro SD card is not attached to the camera or the SD card can not be read, the blue and yellow indication light flashes four times and then goes out. The camera automatically stops.

3.1. Turning the power On/Off
3.1.1. Press the power button for 2 seconds to turn on the camera. After the blue and yellow indication lights are lit for 5 seconds, the yellow light turns off, the blue light stays on and the camera automatically enters standby mode.
3.1.2. If the camera is in recording or standby mode, press the power button for 7 seconds to turn off the camera.

[Caution]: If you are in standby mode, if you do not operate anything for one minute, the camera automatically stops.

3.2. 720P recording
3.2.1. Press the power button for 2 seconds to turn on the camera. Blue and yellow indication light will light for 5 seconds. Then the yellow light goes off, the blue light stays on, indicating that the camera automatically entered the standby.
3.1.2. Press the power button once to record in 1280 x 720P resolution mode. The blue indication light flashes 3 times and then goes out.
3.1.3. Press the power button again to stop recording. The blue indicator light will remain lit indicating that the camera has returned to standby mode.

[Caution]:
1). Video files are automatically generated and saved every 5 minutes.
2). Camera can continuously record for 5.5 hours in case of full charge.
3). Video Resolution: 1280 × 720 P

3.3. 1080P recording
3.3.1. Pressing the power button for 2 seconds turns on the camera. Blue and yellow indication light will light for 5 seconds. Then the yellow light goes out and the blue light stays on, indicating that the camera automatically entered standby mode.
3.3.2. Press the power button for 3 seconds to record at 1920 × 1080 P resolution. The yellow indicator light blinks 3 times and then turns off.
3.3.3. Press the power button again to stop recording. The blue indicator light will remain lit indicating that the camera has returned to standby mode.

3.4. Steel photography
3.4.1. Press the power button for 2 seconds to turn on the camera. After the blue and yellow indicator lights are lit for 5 seconds, the yellow light turns off and the blue light stays on, indicating that the camera automatically entered standby mode.
3.4.2. Press the camera button once to take a still picture. At the same time, the yellow indication lamp flashes once, it disappears, the blue light stays on and the camera enters standby → It means that it has returned to standby mode.

3.5. Initialization of micro SD card
3.5.1. Pressing the power button for 2 seconds turns on the camera. After the blue and yellow indication lights are lit for 5 seconds, the yellow light turns off, the blue light stays on, indicating that the camera automatically entered the standby.
3.5.2. When you press the camera button for 3 seconds, the blue and yellow indication light will blink 4 times at the beginning and light up for 5 seconds at the same time. The yellow indicator light turns off to indicate that the initialization of the SD card is completed.
3.5.3. The blue light stays on, indicating that the camera has entered standby.

IV. Upload video / image file

4.1. Turn off the camera, remove the micro SD card, and insert it into the SD card reader.
4.2. Insert the card reader in the PC computer.
4.3. Micro SD card is recognized as removable disk drive.
4.4. All image files are accessible in «DCIM» folder.

V. Setting the time / date stamp

5.1. Power off the camera and connect it to the PC computer.
5.2. The removable disk drive folder is displayed.
5.3. Click on the drive in the root directory and in the root directory,
Create a file named 'TIMERESET.TXT'.
5.4. Write the current date and time in the 'TIMERESET.TXT' file in the correct format.
Year, month, day, hour, minute, second Y (ex: 20160412142432 Y). Save this file.
If you do not need the timestamp of the video file, change 'Y' in 'TIMERSET.TXT' file to 'N'.
5.5. When the camera is restarted, the system will automatically update the program.

VI. Charging only

6.1. Remove the micro SD card from the camera.
6.2. Connect the camera directly to the output of the AC power socket using the supplied USB cable and DC 5 V charge adapter.
6.3. It takes 3 hours to fully charge.
6.4. During charging, the blue indicator light will continue to light up.
6.5. When the camera is fully charged, the blue and yellow indicator lights will remain lit.

Items in Cart: 0A tree for site navigation will open here if you enable JavaScript in your browser.Seloc Product FinderManufacturer:Engine Year:Engine Model:Getting started is easy! Seloc marine manual download free. Just select the engine you are interested in by using the product finder to the left.It will locate all of the products we offer for your particular engine model, both printed and online.Seloc Marine offers a full line of both printed and online manuals complete with maintenance schedules,wiring diagrams, specifications, parts listings, and complete 'How To' instructions.

VII. Recording at the same time as charging

7.1. Insert the micro SD card in the camera.
7.2. Connect the camera to the AC power socket using the included USB cable and DC5 V 1A charging adapter.
7.3. The blue indicator flashes three times, then goes off, indicating that the camera is recording video at 1280 x 720 P resolution.
7.4. Press the power button once to stop video recording. The blue light stays on, indicating that the camera has automatically entered standby mode.

[Caution]: While charging, you can experience other functions of the camera.

VIII. Reconfiguration

If the camera does not respond for some reason or does not function properly, the Quick Reset restores to normal operation.
Operation: Press the R (reset) button once to reset the camera. The blue and yellow indicator light turns off and the camera automatically stops.

IX. Live video output

9.1. Connect the included AV cable to the TV or monitor.
9.2. Please select camera video signal input jack of TV and monitor.
9.3. Turn on the camera and start recording (see 3.2 or 3.3). Then, you can watch the live video of the camera on a TV or monitor during video recording.
9.4. You can experience other functions of this camera in live view mode.

Specifications:

- HD high quality images FULL HD1080P DV DC
- Support filling side recording function
- Imported high-definition
- High speed transmission of USB 2.0 interface
- Cabinet design, portable handheld DV DC
- The biggest can support 32 g b T - flash CARDS
- Video format: 1280X720P
- Support TV OUT TV monitor video connection
- Video format: 1920X1080P
- Built-in lithium battery for sustainable continuous
- Picture mode: 12M(4032X3024) camera 330 minutes (5.5 hours)

Operating Instructions SQ11 mini DV

Charging
Attention! Before using for the first time, fully charge the mini camera battery!

This mini video camera has a built-in lithium-ion battery. You can perform charging in one of the following ways:
1. Connect the mini video camera to the USB port of your PC, stop recording first.
2. Connect the mini camera to a charger from a 220V network or a portable 5V charger. In this case, you can continue to use the mini-camera in the charging process. In the charging process, the blue and red LEDs will light constantly.
After the mini camera battery is fully charged, the blue LED will light constantly and the red LED will turn off.

• If the built-in battery is empty or there is not enough space on the memory card to continue, the blue and red LEDs on the mini camcorder will blink for 5 seconds simultaneously, after which the mini camcorder will save the recorded video and automatically turn off.
• If the memory card is not installed, the blue and red LEDs of the Mini Recorder will blink simultaneously for 5 seconds, after which the Mini Camera will automatically turn off.
• If the camcorder is in the standby mode and does not take any action on it, the camcorder automatically turns off after 1 minute to save the charge of the built-in battery.

Video recording

• Shooting video with a resolution of 1280X720P
Press the «On / Off» button to turn on the mini camera - the blue LED will light up - the mini camcorder is in the video recording standby mode with 720p quality. Press the «On / Off» button once to start recording video - the blue LED will blink 3 times and go out - 720p video is recorded. The video will be automatically saved every 5 minutes. To stop recording, press the «On / Off» button.

• Shooting video with a resolution of 1920X1080P
Press the «On / Off» button to turn on the mini camera - the blue LED will light constantly. Press the «Mode» button once to enter the video capture mode with 1080p resolution - the red and blue LEDs will light simultaneously, the mini camera is in the video recording standby mode with 1080p quality. To start recording, press the «On / Off» button once - the blue LED will go out, and the red LED will blink 3 times and go out - the video is recorded with a quality of 1080p. The video will be automatically saved every 5 minutes. To stop recording, press the «On / Off» button.

• Motion sensor video recording
To do this, while in the 720p or 1080p video recording standby mode, press and hold the «Mode» button of the mini video camera for 3 seconds - the camcorder enters the motion sensor recording mode. If motion is detected, the video recording will start automatically, with red and blue LEDs blinking at the same time. When recording motion sensor, the video recording is automatically saved every 5 minutes.

• Photo
Press the «On / Off» button to turn on the camera - the blue LED will light up. Press the «Mode» button twice to enter the photographing mode - the red LED will stay lit. To take a picture, press the «On / Off» button once - the red LED blinks once, the photo is saved. The resolution of the received photos is 4032x3024.

• Night light
Press the «On / Off» button to turn it on. Press and hold the «On / Off» button for 2 seconds - the red LED will blink twice - the night illumination is on. To turn off the night illumination, press and hold the «On / Off» button for 2 seconds, the red LED will blink three times - the night illumination is turned off.

• Shutdown
To turn off the camcorder, press and hold the «On / Off» button for 6 seconds. If the Mini Camcorder is in the standby mode and is not in use, it automatically turns off after 1 minute.

• Viewing files
Connect the camcorder in the off state to the computer - after a few seconds it will automatically be detected as a removable disk. The blue indicator will indicate the transfer of information, and the red indicator will indicate the charging of the built-in battery.

New ipad 9.7 inch 6th generation user manual. Not available in China mainland.

• Setting the date and time
Connect the mini video camera to the computer. Setting the time is done by creating a text file named «TIMERSET.txt» in the root directory of the device's memory card, with the following content:
«YYYYMMDDHHMMSS» «Y» (or «N», if you do not want the date and time stamp displayed on video files)
For example, «20170625140003 Y»
After saving the file, disconnect the video camera from the computer and turn it on.

Parameters
● Video resolution: 1920x1080, 1280x720
● Frame rate: 15, 30 frames per second
● Video file type: AVI
● Photo resolution: 4032x3024
● Photo file type: JPEG
● Viewing angle: 140 °
● Night illumination: 6 IR LEDs (range of 5 meters, DO NOT emit light!)
● Motion sensor: Yes (range 5 meters)
● Recording while charging: +
● Duration of work:
• 100 minutes (1 hour 40 minutes) in constant recording mode
• About 5 hours in motion sensor mode
• 24/7 24/7 clock when external power is connected
● Support for memory cards: Micro SD up to 64GB
● Cyclic recording: +
● Operating temperature: -10 ° С + 60 ° С
● Humidity of the environment: 15-85%
● Dimensions: 23x23x23 mm, 15 grams

Mini camera SQ11 with night illumination, motion sensor and viewing angle 140 °.
Mini DV SQ11 is an improved version of the previous SQ8 and SQ9

The camera SQ11 has a built-in motion sensor, can shoot photos with a resolution of 4032x3024, and can also be used for recording in the process of charging from a 220V network or portable chargers, which increases the battery life by 30-40 times.