Tp Link Tl Wr702n User Manual

Posted on
Tp Link Tl Wr702n User Manual Rating: 5,9/10 9595 votes
  1. Tp-link Tl-wr702n Setup
  2. Tp-link Tl-wr700n
  3. Tp-link Tl-wr702n Setup

Note: This FAQ is only suitable for TL-WR702N with firmware version 130314 or older; it is NOT suitable for 130528 or later version.

TP-LINK recommends that you connect to the Range Extender when your home network connection is poor, or when you want a larger wireless coverage to eliminate “dead zones”. 32 TL-WA850RE 300Mbps Universal WiFi Range Extender User Guide. For example, if your wireless client wants to connect to one of the router’s SSID “TP-LINKE3C860” by WPS you should select TP-LINKE3C860 as Current SSID. ¾ WPS Status - Enable or disable the WPS function here. ¾ Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the Router can be found in the. How to Configure Router Mode on TL-WR702N. Internet access from DSL or cable modem is available for one user but more users need to. TP-Link takes your privacy.

Attention, Internet Explorer UserAnnouncement: Jive has discontinued support for Internet Explorer 7 and below.In order to provide the best platform for continued innovation, Jive no longer supports Internet Explorer 7.Jive will not function with this version of Internet Explorer. Create user manual online. Please consider upgrading to a more recent version of Internet Explorer, or trying another browser such as Firefox, Safari, or Google Chrome.(Please remember to honor your company's IT policies before installing new software!).

Definition:The TL-WR702N is connected to a DSL or cable modem and works as a regular wireless router.

Application:Internet access from DSL or cable modem is available for one user but more users need to share the Internet.
Physical Connection
Step 1:
Connect the WR702N directly to your computer’s Ethernet port by an Ethernet cable;
Step 2:
Initial Computer Setup– For Windows 7, Vista & XP (For Mac OS X, please go to page3)
Windows 7&Windows Vista: Go to Start->Control Panel ->Network and Sharing Center
Windows XP: Go to Start->Control Panel->Network Connections
Windows 7: Go to Network andSharing Center->Change Adapter settings
Windows Vista: Go to Network andSharing Center->Manage Network Connections
Step 3:
Windows 7, Vista and XP: Right Click Local Area Connection >Select Properties -> Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) forWindows XP.
Windows 7, Vista and XP: Select “Use the Following IP address:”
1. IP address: 192.168.0.10
Click OK to exit
Tp Link Tl Wr702n User Manual
Windows 7, Vista & XP
Initial Computer Setup– For Mac OS X
Go to the Apple>System Preferences->Network-> Highlight Ethernet ->Configure IPv4: Using DHCP with manual address
Click Apply
Open a Web Browser -> Type 192.168.0.254 in the address bar -> Press Enter
Enter the default Password: admin
Run Quick Setup
Step 1:
Step 2:
Step 3:
Wr702n
SSID: (Rename Your Wireless Name)
Channel: Auto
Channel Width: Auto
PSK Password: (Create a Private Password)
Click Next
Step 4:
Choose the WAN Connection your ISP is using. For most DSL and cable ISP, they use Dynamic IP.
If you’re not sure, please consult with your ISP customer service.
Procedures are different according to the Connection Type you choose.
2) Select PPPoE, input the Username and Password provided by ISP and then click Next;
3) Select Static IP, input the IP parameters provided by ISP and then click Next;
Click: Reboot, and wait until it goes to 100%
You may now connect the WR702N directly into the LAN Ethernet port on the back of your Modem.
Congratulations! Youcan share your internet to multiple wireless devices.
Final Computer Reversion– For Windows 7, Vista & XP (For Mac OS X, please go to page 9)
Step 1:
Windows 7&Windows Vista: Go to Start->Control Panel ->Network and Sharing Center
Windows XP: Go to Start->Control Panel->Network Connections
Windows 7: Go to Network and Sharing Center->Change Adapter settings
Windows Vista: Go to Network and Sharing Center->Manage Network Connections
Step 3:
Windows 7, Vista and XP: Right Click Local Area Connection ->Select Properties -> Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) forWindows XP.
Windows 7, Vista and XP: Select “Obtainan IP address automatically” and “Obtain DNS server address automatically”
Click OK again to apply the settings.
Go to the Apple->System Preferences->Network-> Highlight Ethernet ->Configure IPv4: Using DHCP
If it doesn't work, please feel free to contact us(support@tp-link.com).
Get to know more details of each function and configuration please go toDownload Centerto download the manual of your product.